Remodel coping: pool coping replacement without demolition
A remodel (drop-face) coping piece has a squared-off front lip that hangs down over the pool edge and covers the old beam and the top course of tile. It exists to renovate a pool that already has coping or cantilevered concrete, so you can reface the edge without demolishing the deck. If you are searching for pool coping replacement, this is the profile: it goes on over what is there. This collection carries the remodel profile in two sizes, 4x9 and 12x12, in marble, travertine and limestone.
Which size to use
The 4x9 remodel piece is the standard for freeform and kidney-shaped pools: the 9" length turns tight curves without large wedge joints, and the 4" width covers a typical beam. The 12x12 remodel piece suits rectangular and geometric pools where fewer joints look cleaner and the beam is wider. Both are cut to sit flush against the existing deck, and the pool coping size guide covers how to lay out each shape. If you are building new rather than replacing, start with bullnose coping for a curved pool or eased edge coping for a straight-line one; the differences are explained in bullnose vs eased edge, and every profile is on the pool coping stones hub.
Colors and finishes
The marble remodel pieces come in Corsica Cream, Ibiza White, Bursa White, Ice White, Tundra Grey, Diane Royal and Ocean Blue, plus newer stones including Saranac White, Vineyard Gray and Willamette Gray, finished leather or sandblasted for slip resistance around the water. The travertine options are Ivory, Noce, Walnut, Silver, Country Classic, Extra Light, Silver Kashmir and Valencia. Because a replacement job usually keeps the existing deck, order samples and check the coping against the deck color in daylight before committing to a pallet.
Measuring for a replacement
Measure the pool perimeter at the waterline in linear feet. Divide by 0.75 for 4x9 pieces or by 1 for 12x12, then add 10 percent for curves and cuts. Each product page lists pieces per pallet, and remodel coping can also be ordered per piece to top off a short count. The stone pool coping buyers guide covers setting a drop-face piece over an existing beam.
Frequently asked questions
What does remodel coping actually cover?
The drop face hides the existing bond beam edge and the top row of waterline tile that was under the old coping. Its top sits level with the deck so you can pour or pave up to it. It is designed for resurfacing, not for new construction where a bullnose or eased edge is standard.
Can I use 4x9 remodel coping on a straight-edged pool?
You can, though the joints every nine inches give a busier look. On a rectangular pool most builders prefer the 12x12 remodel piece. On a freeform pool the 4x9 is the better tool because it follows curves with narrow joints.
How much remodel coping do I need?
Measure the perimeter of the pool at the edge in linear feet. For 4x9 pieces divide by 0.75; for 12x12 pieces divide by 1. Add 10 percent for cuts, curves and a few spares. Product pages list pieces per pallet, and per-piece ordering fills any gap.
Is the remodel profile available in 2" thickness?
Not in this collection; every remodel piece here is 1-1/4" (3 cm). The thinner section is intentional, since it sits on top of an existing beam and needs to meet the old deck height. Thicker 2" coping is available in the standard bullnose and eased-edge profiles.





