Diane Royal Marble Pool Decks: Pavers Plus Coping
Diane Royal is a beige marble with a soft cream-to-tan ground and thin, darker veins that meander across each piece without dominating it. Two finishes are offered: leather, which brushes the face to a low-sheen ripple with square edges, and sandblasted, which gives a finer, more uniform texture with the most wet traction. A few tumbled pieces exist as well. As a dense marble it takes fewer stains than travertine. It sits in our beige family and works with tan brick, white trim and both blue and gray pool interiors. This page focuses on building a pool deck from matched pavers and coping; for the full product list in every format, see every Diane Royal format.
Pool-deck combinations that work
The advantage of Diane Royal is that the coping and the field come from the same stone in the same finish, so the edge and the deck match. Three combinations cover most pools. Freeform residential pool: 2" 12x24 bullnose coping with 1-1/4" 16x24 pavers in a running bond; the bullnose follows curves cleanly and the 16x24 field cuts well against them. For a rectangular pool with straight runs: 2" 16x24 eased-edge coping with 24x24 or 24x36 pavers, keeping the coping and paver joints aligned for a tailored look. For a raised spa or long straight edges: 24x36 or 16x48 coping with a matching leather paver field, and the 2" 24x72 treads for steps and wall tops. Coping is also cut in 4x9, 6x12 and 14x24, and remodel (drop-face) coping is listed for an existing bond beam; see remodel coping.
Choosing profile, finish and thickness
Match the finish across coping and pavers; leather on the coping and sandblasted on the deck is possible but visible. Sandblasted is the safer choice for a deck where children run wet, and leather is the choice where a smoother, more finished surface matters. The bullnose vs eased edge guide and the coping size guide cover profile and size by pool shape. Seal Diane Royal after installation and clean with pH-neutral products, since marble etches from acids. Close relatives are Corsica Cream, a lighter cream marble, and Crema Pearl, a flecked beige in sandblasted only. Order samples of the coping and paver together before quoting the full pool deck.
Frequently asked questions
What is the difference between this page and the Diane Royal stone page?
Both list the same 84 Diane Royal products. This page is organized around building a pool deck, with suggested coping and paver pairings by pool shape. The stone page lists every format without the pairing guidance. Use whichever is easier to shop from; the products and pallets are identical.
Which Diane Royal coping profiles and sizes are available?
Bullnose and eased-edge coping in 4x9, 6x12, 12x24, 14x24, 16x24, 24x36 and 16x48, in 1-1/4 inch and 2 inch thickness, plus remodel drop-face coping and 2 inch 24x72 treads. Finishes are leather and sandblasted. Each listing shows pieces per pallet and per-piece ordering.
Should coping and pavers be the same finish?
Usually yes. Leather coping on a sandblasted field is noticeable at the joint line because the sheen differs. Pick sandblasted throughout for maximum wet traction on a family pool, or leather throughout for a smoother, more finished look. Order one sample of each finish and compare them wet.
How much Diane Royal coping and paver do I need?
Measure the pool perimeter in linear feet for coping and divide by the coping piece length, then measure the deck area in square feet and add 10 percent for straight decks or 15 percent for curves. Send the pool drawing with a quote request and we will check the counts before the pallets ship.


