Crema Pearl Marble

Crema Pearl is a creamy beige marble with fine pearl-gray flecks, finished sandblasted for outdoor grip. This collection lists sixteen paver formats from 6x12 up to 36x36 and 24x48, in 1-1/4" and 2" thickness, sold by the pallet and shipped nationwide by LTL freight. Notes on the finish, sizes and what to pair with it are below the products.

16 products

Crema Pearl Sandblasted Marble Pavers

Crema Pearl is a dense beige marble with a fine, speckled grain: a cream to light beige ground scattered with small gray and pearl-white flecks, and occasional soft veins. Sandblasting gives it a fine, evenly textured face that is slip-resistant when wet without the rounded edges of a tumbled stone, so the pieces keep crisp, square corners and tight joints. The result is a paver that looks tailored and modern from a distance while still reading as natural stone up close. It is grouped with our beige stones and pairs with white render, light oak decking and blue or turquoise pool interiors.

Formats in Crema Pearl

All sixteen listings are pavers. Sizes are 6x12, 12x12, 12x24, 16x16, 16x24, 24x24, 24x36, 24x48 and 36x36. The 1-1/4" thickness covers the standard pool deck and patio sizes, and the 2" thickness is offered in the larger formats for open-joint layouts, stepping pads and pedestrian paths on a compacted base. Crema Pearl has no coping listing of its own; for the pool edge most builders choose a sandblasted or leather marble coping in a matching beige from the pool coping collection, or a remodel coping piece if they are resurfacing an existing pool.

Pairing and care

Marble is harder and less porous than travertine, so Crema Pearl takes fewer stains and holds a cleaner look on a busy deck, but it still needs a penetrating sealer; the sealing and maintenance guide sets out the schedule. The sandblasted texture hides light scratches well but collects fine dirt, so a hose and a soft brush once a season keeps the flecked pattern visible. Crema Pearl lays cleanly in a 24x24 grid or a 12x24 and 24x24 two-size pattern; keep joints narrow to make the most of the square edges. Its closest relatives are Moon Cream, a paler cream marble in a leather finish, and Diane Royal, which has more visible veining. For a comparison of how a sandblasted marble deck performs against tumbled travertine over years of pool use, the travertine vs marble guide is the place to start. If a border is wanted, a dark brushed basalt or a gray porcelain plank around a Crema Pearl field is the usual detail.

Frequently asked questions

What does a sandblasted finish feel like compared with tumbled?

Sandblasting texturizes the face with fine, even pitting while leaving the edges square and sharp. Tumbling rounds the edges and softens the whole piece. Sandblasted Crema Pearl gives good wet traction with a cleaner, more tailored look and tighter joints, which suits modern pool decks.

Which sizes of Crema Pearl are 2 inch thick?

The 2 inch pieces are in the large formats: 24x24, 24x36, 24x48 and 36x36. The 6x12 through 16x24 pavers are 1-1/4 inch. Each listing names the thickness, square footage per pallet and weight so freight can be planned before you order.

Does Crema Pearl stain or etch?

Marble resists staining better than travertine but is still a calcium stone, so acids such as citrus, vinegar and some pool chemicals can etch it. Seal after installation, wipe spills promptly and clean with pH-neutral products. The flecked pattern hides minor marks better than a plain stone.

Is there matching Crema Pearl coping?

Not in this collection. For a pool edge, use a beige marble coping such as Diane Royal or Corsica Cream in a leather or sandblasted finish, or a remodel coping if you are covering an existing bond beam. Order samples of the coping and the paver together to confirm the match.