Symra Limestone Pavers: Sizes and Layout Options
Symra is the more restrained of our two cream limestones. The color is a light cream that stays consistent across a pallet, with very little of the tan movement found in Myra, and the grain is tight enough that the tumbled face feels smooth rather than sandy. Because the surface is so even, Symra suits minimalist landscapes where the stone should be a background: a plain cream field around a dark pool, or a large-format terrace beside a modern glass-and-render house. It sits in the ivory family on our color pages, right at the border with beige.
Sizes and thicknesses
Symra is cut in ten paver sizes: 6x12, 12x12, 12x24, 16x16, 16x24, 18x36, 24x24, 24x36, 24x48 and 36x36. The 1-1/4" pieces cover the pool deck and patio sizes, and the 2" pieces are concentrated in the 24-inch-and-larger formats. A common plan uses 2" 36x36 squares as a stepping path or a bare grid with gravel joints, with 1-1/4" 16x24 for the mortar-set pool deck. The 18x36 plank is a Symra format worth noting; laid in a staggered bond it produces a long, low pattern that works well along a pool's length. For a pool edge, choose a coping from the pool coping collection in a similar cream, since there is no Symra coping.
Using Symra on a project
Symra's uniform color gives you no pattern to hide inconsistent joints behind, so lay it with tight, even joints and a consistent grout or sand color a shade darker than the stone. Seal it promptly with a natural-look penetrating sealer; the sealing and maintenance guide applies to limestone as well. For a border, Serpeggiante or Pistachio leather limestone gives a subtle contrast in the same material, or use a dark brushed basalt strip. If the project is comparing a light limestone against a light marble, Moon Cream leather marble is the marble counterpart in nearly the same cream tone, harder and more uniform still. Symra is a limestone and should be cleaned only with pH-neutral products. For an overview of the full paver range in the same sizes, see the paver collection, and if the deck is in a cold climate the freeze-thaw guide explains base and drainage requirements for limestone.
Frequently asked questions
Is Symra lighter than Myra?
Yes, slightly. Symra is a consistent pale cream with a tight grain; Myra has more tonal shift toward tan and a sandier surface. Both are tumbled limestone in the same sizes and thicknesses. Symra is the choice for a very even, quiet field; Myra when a little warmth and movement is wanted.
Can Symra be used on a driveway?
Use the 2 inch pieces on a properly compacted aggregate base for a residential driveway. The 1-1/4 inch pavers are intended for pedestrian areas over concrete. Limestone is softer than granite or basalt, so avoid sharp turning of heavy vehicles on it and seal it against oil drips.
What joint width and grout color suit Symra?
Keep joints even, usually 1/4 inch for mortar-set pool decks and 1/8 to 3/16 inch for sand-set patios. Choose a grout or polymeric sand one shade darker than the stone; a pure white joint looks stark and a dark gray joint turns the pattern into a grid. Test a small area first.
Does Symra come with matching coping or steps?
No. This collection is pavers only. For a pool edge, most projects use an Ivory travertine or a light marble coping from our pool coping range. For steps, a 2 inch 24x36 or 24x48 Symra paver can be set as a square-edge tread on a poured concrete step.

