Myra Limestone

Myra is a light beige limestone with a soft, even texture, finished tumbled. This collection is pavers only: seventeen listings from 6x12 through 36x36 and 24x48, with 1-1/4" and 2" thicknesses across most sizes. Everything ships by the pallet on LTL freight, with coverage and weight on each product page. What each size is for and what to pair it with is explained below.

17 products

Myra Limestone Pavers in Ten Sizes

Myra is a warm beige limestone with a fine, sandy texture and gentle tonal variation from cream to light tan. It has none of the sharp veining of marble and only a scattering of small shell fragments, so a finished surface looks soft and consistent. The tumbled finish gives an easy-going, slightly aged edge that suits both traditional and contemporary work. Myra falls in our beige color family and is one of the stones we suggest when a client wants warmth without the orange tones some travertines show.

What the collection contains

Every listing here is a paver. Sizes run 6x12, 12x12, 12x24, 16x16, 16x24, 18x36, 24x24, 24x36, 24x48 and 36x36. The smaller formats are mostly 1-1/4", while the large formats from 24x24 up are where the 2" thickness lives. That makes Myra a two-track stone: 1-1/4" 12x24 and 16x24 for pool decks and patios over concrete, and 2" 24x36, 24x48 and 36x36 for plank layouts, stepping pads through gravel or lawn, and pedestrian paths on a compacted base. There is no Myra coping, so pair it with a beige travertine or marble coping from the pool coping collection, or use a large Myra paver as a square-edge coping on a spa wall.

Pairing and installation notes

Myra is close enough in tone to Symra that the two can be mixed on one project if a size is short in one or the other; Symra is a shade lighter and slightly more uniform. Against Myra, a dark border in Sandy Beige brushed basalt or a charcoal porcelain plank gives a clean modern frame, and a Diane Royal marble coping gives a lighter marble edge with faint veining. Keep the sealer natural-look; an enhancing sealer pushes Myra toward tan and can make it look wet all the time. Limestone should be cleaned with pH-neutral products only. When ordering large formats, allow extra pieces for cuts and follow the overage guide so you are not waiting on a second pallet. If the project is in a hard freeze zone, read how natural stone handles freeze-thaw and lean toward the 2" material on a well-drained base.

Also sold as: Mayra White at distributors is this warm-white Turkish limestone under a different spelling. Our Myra is a close match; see the cross-reference page and compare a sample before buying.

Frequently asked questions

What is the difference between Myra and Symra limestone?

Both are beige tumbled limestones cut in the same ten sizes. Myra runs a shade warmer with a little more tonal movement from cream to tan; Symra is slightly lighter and more even. They are close enough to combine on a project if one size is short, but order samples of both to confirm the match.

Which Myra sizes come in 2 inch thickness?

The 2 inch listings are concentrated in the large formats: 24x24, 24x36, 24x48 and 36x36. The smaller pavers are mostly 1-1/4 inch. Each product page shows the thickness in the title and the square footage and pallet weight for freight planning.

Is there Myra pool coping?

No. This collection is pavers only. Most builders use a beige travertine or a Diane Royal or Corsica Cream marble coping with Myra decking, or set a 2 inch 24x24 Myra paver as a square-edge cap on a raised spa wall. Sample the coping and paver together before committing.

How much overage should I order for large-format Myra?

Plan on 10 percent for rectangular layouts and 15 percent for curved pool decks or plank layouts with many cuts. Large pieces that break during cutting cannot be reused as easily as small ones, and freight for a single replacement pallet costs more per square foot than including it in the first shipment.